Cylinders

VDMA cylinders, Series 61 (DIN / ISO 6431) End dampend, magneettimännällä Ø 32, 40, 50, 63, 80, 100, 125 single- or double-acting series 61 cylinders, the diameters of 32, 40, 50, 63, 80, 100 and 125 manufactured in accordance with DIN / ISO 6431 in accordance with. The cylinders are equipped with standard magneettimännällä and an adjustable cushioning. In addition to the adjustable damping cylinders is called. mechanical damping to prevent sharp shock caused by the piston and the cylinder sound when struck by the end of the cylinder. Clean, pure aluminum profile pipe, and placement of steel used in the cylinder by means of the studs is provided a very solid structure. Design, in particular the piston excellent control, as well as the piston rod pronssilaakeroinnin thanks to a series of cylinders 61 may be prepared substantially in Table reported attacks longer.Standard cylinders are equipped with NBR seals, except the piston rod seal, which is made of polyurethane (PUR)but also the cylinders can be fitted with Viton
seals in hot conditions or special seals exceptionally cold conditions (up to -40ºC).In addition to special order, made from cylinders stainless piston arms, studs and nuts.Magnetic detectors used in series CST sensors that sink in completely profile of the grooves on three sides and adhere without additional fasteners.Further information about the sensors and other equipment the brochure “Cylinder Equipment”.The sensors and cylinder brackets have to be
ordered separately and are supplied loose.

pdf
Minicylindrar 16-24-25
pdf
Runda cylindrar 27
pdf
Kompakta cylindrar QP
pdf
VDMA-cylindrar 61